đźšš Free Worldwide Shipping on All Orders!Shop Now
HomeStore

STIHL Chainsaw Cut Kit 6 - 30cm/12", 1/4" P, 1.1, PM3

Product image 1

STIHL Chainsaw Cut Kit 6 - 30cm/12", 1/4" P, 1.1, PM3

Overview

STIHL Cut Kit 6 is a factory-replacement bar-and-chain assembly for STIHL chainsaws. The kit optimizes cutting performance with a 30 cm (12") bar length and a 1/4" pitch chain configured as PM3, featuring a 1.1 mm gauge. Designed for routine bar-and-chain replacement, it supports tasks such as firewood prep, limb pruning, and general site maintenance on compatible STIHL machines.

Key Features

  • Part Number: Not provided
  • Type of machine suitable for: STIHL chainsaws using a 30 cm/12" bar with 1/4" pitch PM3 chain (1.1 gauge)
  • Installation tips:
    • Power off the saw and engage the chain brake before servicing.
    • Remove the existing bar and chain, inspect the groove and drive sprocket for wear.
    • Install the bar with correct orientation, fit the PM3 chain around the bar and sprocket, and seat the bar against the sprocket correctly.
    • initially tension the chain slightly loose for mid-span sag, then run the saw and re-tension while warm after a brief test cut.

Compatibility

  • Suitable machine models: STIHL chainsaws that require a 30 cm/12" bar and 1/4" pitch PM3 chain (1.1 gauge)
  • Alternative part numbers: Not listed
$103.63
STIHL Chainsaw Cut Kit 6 - 30cm/12", 1/4" P, 1.1, PM3—
$103.63

Product Information

Shipping & Returns

Description

Overview

STIHL Cut Kit 6 is a factory-replacement bar-and-chain assembly for STIHL chainsaws. The kit optimizes cutting performance with a 30 cm (12") bar length and a 1/4" pitch chain configured as PM3, featuring a 1.1 mm gauge. Designed for routine bar-and-chain replacement, it supports tasks such as firewood prep, limb pruning, and general site maintenance on compatible STIHL machines.

Key Features

  • Part Number: Not provided
  • Type of machine suitable for: STIHL chainsaws using a 30 cm/12" bar with 1/4" pitch PM3 chain (1.1 gauge)
  • Installation tips:
    • Power off the saw and engage the chain brake before servicing.
    • Remove the existing bar and chain, inspect the groove and drive sprocket for wear.
    • Install the bar with correct orientation, fit the PM3 chain around the bar and sprocket, and seat the bar against the sprocket correctly.
    • initially tension the chain slightly loose for mid-span sag, then run the saw and re-tension while warm after a brief test cut.

Compatibility

  • Suitable machine models: STIHL chainsaws that require a 30 cm/12" bar and 1/4" pitch PM3 chain (1.1 gauge)
  • Alternative part numbers: Not listed